07-131 Clutch Kit: Ford 7.3L Diesel F250 F350 F450 Pickup - 12-1/4 in.

This is a stock replacement clutch kit containing only quality tested components. The original stock pressure plate and woven organic disc are ideal for maintaining the smooth engagement and reliability you are used to from the original clutch when the vehicle was new.

This is a direct stock replacement clutch kit and will not require any modifications during installation and includes all necessary components when replacing your clutch.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Equivalent to: K70244-01

Other available clutch kits for this vehicle:

07-131.2K             Kevlar, Engine Torque Capacity = 440 lb.ft., 230HP
07-131.3C            Ceramic, Engine Torque Capacity = 555 lb.ft., 285HP

07-131ACK           Organic, Engine Torque Capacity = 380 lb.ft., 195HP (includes flywheel FW128)
07-131ACK.3C      Ceramic, Engine Torque Capacity = 555 lb.ft., 285HP (includes flywheel FW128)

07-131CK            Organic, Engine Torque Capacity = 380 lb.ft., 195HP (includes flywheel FW127)
07-131CK.2K       Kevlar, Engine Torque Capacity = 440 lb.ft., 230HP (includes flywheel FW127)
07-131CK.3C       Ceramic, Engine Torque Capacity = 555 lb.ft., 285HP (includes flywheel FW127)

To determine the horsepower added by performance modifications, click here

To see comments and suggestions regarding transmission gear rattle, click here

This kit is used with a Solid Flywheel only.

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Woven Organic 12-1/4" x 10T x 1-1/4" Dampened Push
Kit Includes: Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing, Alignment Tool
Engine Torque = 380 lb-ft., 195HP

Bolt Tightening Specs:

Pressure Plate Mounting Bolts: 20-29 lb.ft.
Flywheel to Crank Mounting Bolts: 47 lb.ft.

Refer to the technical bulletin TB031 regarding possible "No Release" issue and the use of Upgraded Hydraulics.
Covers 1993-1995 7.3L DIESEL and 7.5L GAS Ford F250, F350, and F450 Super Duty

Refer to the technical bulletin TB043 regarding solid flywheel installation notes.

Technical Bulletins are shown to provide you with additional information that may affect the installation of this clutch part in your vehicle. The bulletin does not indicate that the part you are looking to purchase is compromised in any way. These bulletins are often generated by the original vehicle manufacturer or the original clutch manufacturer and are intended to make the installer aware of issues that may affect the performance of the clutch system.

There are no comments for this product.

Fits: