This is a Phoenix Friction Stage 3 Street Performance Clutch Kit. The kit features a Phoenix Friction high heat Ceramic spring dampened disc. It will provide up to a 60% increase over the stock engine torque capacity. At the same time, you will not notice any increase in pedal effort over the stock clutch and offers chatter-resistant lift-off for a great daily ride. Ceramic button discs will give you the fastest shifts due to their low radial mass which reduces their overall flywheel effect and works with all flywheels, including lightweight steel and aluminum. You can expect 200% the life over original equipment woven organic linings from Ceramic buttons under normal driving conditions. These buttons will absorb the most energy of all the friction materials and is the material of choice for the highest torque applications.
A GREAT value performance clutch kit that enables quick vehicle launch.
A Phoenix Stage 3 Street Performance product is a direct factory fit and requires no modifications for installation.
Features:
- We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
- Our kits contain all new components
- They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
- All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
- We warrant that all products are free from defects in workmanship and materials
- Expert toll-free technical assistance is available
Other available clutch kits for this vehicle:
07-131 Organic, Engine Torque Capacity = 380 lb.ft., 195HP
07-131.2K Kevlar, Engine Torque Capacity = 440 lb.ft., 230HP
07-131ACK Organic, Engine Torque Capacity = 380 lb.ft., 195HP (includes flywheel FW128)
07-131ACK.3C Ceramic, Engine Torque Capacity = 555 lb.ft., 285HP (includes flywheel FW128)
07-131CK Organic, Engine Torque Capacity = 380 lb.ft., 195HP (includes flywheel FW127)
07-131CK.2K Kevlar, Engine Torque Capacity = 440 lb.ft., 230HP (includes flywheel FW127)
07-131CK.3C Ceramic, Engine Torque Capacity = 555 lb.ft., 285HP (includes flywheel FW127)
To determine the horsepower added by performance modifications, click
here
To see comments and suggestions regarding transmission gear rattle, click
here
Technical Bulletin information
Refer to the technical bulletin
TB031
regarding possible "No Release" issue and the use of Upgraded
Hydraulics.
Covers 1993-1995 7.3L DIESEL and 7.5L GAS Ford
F250, F350, and F450 Super Duty
Refer to the technical bulletin
TB043
regarding solid flywheel installation notes.
Technical Bulletins are shown to provide you with additional
information that may affect the installation of this clutch part in
your vehicle. The bulletin does not indicate that the part you are
looking to purchase is compromised in any way. These bulletins are
often generated by the original vehicle manufacturer or the original
clutch manufacturer and are intended to make the installer aware of
issues that may affect the performance of the clutch system.