16-205.3C Stage 3 Ceramic Clutch Kit: Toyota FJ Cruiser Tacoma Tundra V6 4.0L - 10-7/8 in.

This is a Phoenix Friction Stage 3 Street Performance Clutch Kit. The kit features a Phoenix Friction high heat Ceramic spring dampened disc. It will provide up to a 60% increase over the stock engine torque capacity. At the same time, you will not notice any increase in pedal effort over the stock clutch and offers chatter-resistant lift-off for a great daily ride.

Ceramic button discs will give you the fastest shifts due to their low radial mass which reduces their overall flywheel effect and works with all flywheels, including lightweight steel and aluminum. You can expect 200% the life over original equipment woven organic linings from Ceramic buttons under normal driving conditions. These buttons will absorb the most energy of all the friction materials and is the material of choice for the highest torque applications.

A Phoenix Stage 3 Street Performance product is a direct factory fit and requires no modifications for installation.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

16-205             Organic, Engine Torque Capacity = 295 lb.ft., 335hp
16-205.2K        Kevlar, Engine Torque Capacity = 370 lb.ft., 420hp
16-205.3C        Ceramic, Engine Torque Capacity = 410 lb.ft., 470hp (current selection)
16-205.3KC      Kevlar/Ceramic, Engine Torque Capacity = 405 lb.ft., 465hp

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Ceramic 10-7/8" x 21T x 1-1/8" Dampened Push
Kit Includes:  Pressure Plate, Clutch Disc, Release Bearing, Alignment Tool

This product has a Technical Bulletin regarding 6 Speed Manual Clutch Release Bearing Squeak or Rattle Noise.

 See 2010 bulletin T-SB-0365-10.pdf and 2012 revision T-SB-0186-12 Toyota FJ Tacoma 6MT.pdf

For a further discussion of this issue, see the Tacoma World forum article shown here: 2nd Gen Tacoma Release Bearing (Throw Out Bearing) Destructive Findings and Shift Detent mod.pdf

There are no comments for this product.

Fits: