16-205.3KC Kevlar Ceramic Clutch Kit: Toyota FJ Cruiser Tacoma Tundra V6 4.0L - 10-7/8 in.

This is a Phoenix Friction Stage 3 combination Kevlar and Ceramic Street Performance Clutch Kit. The kit features an original stock pressure plate and a Phoenix Friction high heat Kevlar and Ceramic spring dampened disc.

The combination of a full-faced Kevlar friction material and a bonded Ceramic button ring clutch handles high heat levels and minimizes chatter. It will provide up to a 33% increase in engine torque capacity over the OE clutch. At the same time, you will not notice any increase in pedal effort over the stock clutch. The combination of these two premium friction materials provides up to a 200% gain in clutch life than that of original equipment under normal driving conditions. Note: Kevlar is a high tech material that needs up to a 1000 mile break in period to properly seat for optimum performance.

A Phoenix Stage combination Kevlar and Ceramic Street Performance Clutch Kit is a direct factory fit and requires no modifications for installation. The kit is a complete clutch kit and includes all necessary components when replacing your clutch.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

16-205             Organic, Engine Torque Capacity = 295 lb.ft., 335hp
16-205.2K        Kevlar, Engine Torque Capacity = 370 lb.ft., 420hp
16-205.3C        Ceramic, Engine Torque Capacity = 410 lb.ft., 470hp
16-205.3KC      Kevlar/Ceramic, Engine Torque Capacity = 405 lb.ft., 465hp (current selection)

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Hybrid Kevlar/Ceramic 10-7/8" x 21T x 1-1/8" Dampened Push
Kit Includes:  Pressure Plate, Clutch Disc, Release Bearing, Alignment Tool

This product has a Technical Bulletin regarding 6 Speed Manual Clutch Release Bearing Squeak or Rattle Noise.

 See 2010 bulletin T-SB-0365-10.pdf and 2012 revision T-SB-0186-12 Toyota FJ Tacoma 6MT.pdf

For a further discussion of this issue, see the Tacoma World forum article shown here: 2nd Gen Tacoma Release Bearing (Throw Out Bearing) Destructive Findings and Shift Detent mod.pdf

There are no comments for this product.

Fits: