07-501.4C Stage 4 Extra Heavy Duty Ceramic Clutch Kit: Ford 7.3L Powerstroke Diesel F250 F350 F450 Pickup - 13 in.

This is a Phoenix Friction Stage 4 Street Performance Clutch Kit. This kit features a High Clamp Pressure Plate and a Phoenix Friction high heat Ceramic spring dampened disc. It will provide up to a 80% increase over the stock engine torque capacity. At the same time, you will only notice a slight increase in pedal effort over the stock clutch and offers chatter-resistant lift-off for a great daily ride.  Our Ceramic button discs will give you the fastest shifts due to their low radial mass which reduces their overall flywheel effect and works with all flywheels, including lightweight steel and aluminum. You can expect 200% the life over original equipment woven organic linings from Ceramic buttons under normal driving conditions. These buttons will absorb the most energy of all the friction materials and is the material of choice for the highest torque applications. Recommended performance clutch package for moderately modified vehicles that desire a quick vehicle launch.


A Phoenix Stage 4 Street Performance product is a direct factory fit and requires no modifications for installation.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

07-501            Organic, Engine Torque Capacity = 530 lb.ft., 275HP
07-501.3         Organic, Engine Torque Capacity = 685 lb.ft., 355HP
07-501.3C       Ceramic, Engine Torque Capacity = 750 lb.ft., 400HP

07-501CK        Organic, Engine Torque Capacity = 530 lb.ft., 275HP (includes flywheel)
07-501CK.3     Organic, Engine Torque Capacity = 685 lb.ft., 355HP (includes flywheel)
07-501CK.3C   Ceramic, Engine Torque Capacity = 750 lb.ft., 400HP (includes flywheel)
07-501CK.4C   Ceramic, Engine Torque Capacity = 975 lb.ft., 500HP (includes flywheel)

To determine the horsepower added by performance modifications, click here

To see comments and suggestions regarding transmission gear rattle, click here

This kit is to be used with a Valeo Type Solid Flywheel, Part Number FW507.

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Ceramic 13" x 10T x 1-1/4" Dampened Push
Kit Includes:  Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing, Alignment Tool
Engine Torque = 975 lb-ft., 500HP

Bolt Tightening Specs:

Pressure Plate Mounting Bolts: 21 lb.ft.
Flywheel to Crank Mounting Bolts: 89 lb.ft.

Refer to the technical bulletin TB031 regarding possible "No Release" issue and the use of Upgraded Hydraulics.
Covers 1993-1995 7.3L DIESEL and 7.5L GAS Ford F250, F350, and F450 Super Duty

Technical Bulletins are shown to provide you with additional information that may affect the installation of this clutch part in your vehicle. The bulletin does not indicate that the part you are looking to purchase is compromised in any way. These bulletins are often generated by the original vehicle manufacturer or the original clutch manufacturer and are intended to make the installer aware of issues that may affect the performance of the clutch system.

There are no comments for this product.

Fits: