Due to changes implemented on June 1st by UPS, Free Shipping is not currently working. We are working on resolving this issue asap. In the mean time, if you are charged for shipping on items marked "Free Shipping", you can either place the order online and we will refund the shipping charge or you can call the office during our business hours and we will gladly take your order.
29thAnniversarySeal

Start Here

Using the vehicle selector to the right will present you with the correct selection of parts relevant to your specific vehicle.

CF9864K Clutch Fork and Ball Stud Kit: Dodge Ram Series 2500, 3500

Actual product(s) shown.

CF9864K Clutch Fork and Ball Stud Kit: Dodge Ram Series Pickup

MSRP: $192.29113.1900
Price: $119.19
Sale Price: $113.19

This item qualifies for Free Shipping!


Part #: CF9864K
Brand: Phoenix Friction Products
Weight: 5
Handling Time: 1-2 days
This is a new OE replacement Clutch Fork with a new Ball Stud, Ball Stud Retaining Clip, and a Spacer washer. The picture is of the actual product.

Wear at the contact points of the clutch fork and the release bearing can cause hard pedal and/or problems with release. In addition, clutch forks made from stamped steel have a tendency to warp or fatigue and not retain their original shape. It is recommended to carefully inspect the clutch fork for these issues and replace as required. Inspection of the transmission bearing retainer, clutch ball stud, bushings, and other release system components is also highly recommended at this time. Replace parts as necessary.

The spacer washer is used only when the original spacer washer is not available due to a prior double disc clutch conversion. The double disc clutch sits closer to the transmission than OE and in order for it to work, the original ball stud spacer washer needs to be removed. Failure to install a 1/8" thick spacer washer may result in partial release of the clutch since the slave cylinder push rod will need to travel further to fully disengage.
Overall Length: 13-3/8"
Rod to Pivot: 12-1/4"
Pivot to Bearing: 6-3/4"
Ratio: 1.81

Fork Opening: 2"
Bearing Contact Point - Center to Center: 3-3/4"
Technical Bulletin information Refer to the technical bulletin TB044 regarding the proper clutch fork orientation during replacement.

Technical Bulletins are shown to provide you with additional information that may affect the installation of this clutch part in your vehicle. The bulletin does not indicate that the part you are looking to purchase is compromised in any way. These bulletins are often generated by the original vehicle manufacturer or the original clutch manufacturer and are intended to make the installer aware of issues that may affect the performance of the clutch system.

Customer Reviews
(3.79)
# of Ratings: 14
1. Michael on 5/6/2024, said:
Stud ball plastic end was cracked and chipped. fork was ok
Was this comment helpful? yes no
(0 people found this comment helpful, 0 did not)
2. Anonymous User on 12/29/2023, said:
Part came with the order, realized it was the wrong fork, afffter it wouldnt go into gear. Needless to say I got well acquainted with my transmission :) ended up using the old fork and back on the road!
Was this comment helpful? yes no
(0 people found this comment helpful, 0 did not)
3. Anonymous User on 12/25/2023, said:
product appeared to be high quality and the shipping was very prompt
Was this comment helpful? yes no
(0 people found this comment helpful, 0 did not)
4. Anonymous User on 7/15/2023, said:
Did a swap from a dual disc to a single Phoenix Friction clutch and forgot to add the washer back in behind the pivot ball. This kit was an exact fit and works well
Was this comment helpful? yes no
(0 people found this comment helpful, 0 did not)
5. Anonymous User on 7/3/2022, said:
good product
Was this comment helpful? yes no
(0 people found this comment helpful, 0 did not)
6. Stephanie on 3/19/2022, said:
Clutch seems to be better than the last. I would definitely recommend. We pull lots of trailers. Shifts smooth and lots of power.
Was this comment helpful? yes no
(0 people found this comment helpful, 0 did not)
7. Anonymous User on 10/22/2021, said:
Easy to order. Came early. Definitely will do more business when I need parts.
Was this comment helpful? yes no
(0 people found this comment helpful, 0 did not)
8. Anonymous User on 2/8/2021, said:
Direct replacement and good price. Recommend to replace while you’re replacing the clutch.
Was this comment helpful? yes no
(0 people found this comment helpful, 0 did not)
9. Anonymous User on 10/27/2020, said:
NICE ADDITION TO THE 5 STAGE CLUTCH KIT
Was this comment helpful? yes no
(0 people found this comment helpful, 0 did not)
10. Anonymous User on 10/25/2020, said:
It performs as it should, it replaces a fork that has gone thru 2 new clutches over the life of the vehicle. It restores its original function.
Was this comment helpful? yes no
(0 people found this comment helpful, 0 did not)
Showing comments 1-10 of 12 (Next 10)
Click Here to see all comments
Fits:
Shipping Estimate: