04-160.3C Stage 3 Ceramic Clutch Kit: GM Pickups, P30 StepVan - 12 in.

This is a Phoenix Friction Stage 3 Street Performance Clutch Kit. The kit features a Phoenix Friction high heat Ceramic spring dampened disc. It will provide up to a 60% increase over the stock engine torque capacity. At the same time, you will not notice any increase in pedal effort over the stock clutch and offers chatter-resistant lift-off for a great daily ride.

Ceramic button discs will give you the fastest shifts due to their low radial mass which reduces their overall flywheel effect and works with all flywheels, including lightweight steel and aluminum. You can expect 200% the life over original equipment woven organic linings from Ceramic buttons under normal driving conditions. These buttons will absorb the most energy of all the friction materials and is the material of choice for the highest torque applications.

A Phoenix Stage 3 Street Performance product is a direct factory fit and requires no modifications for installation.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

04-160        Organic, Engine Torque Capacity = 400 lb.ft., 355HP
04-160.2K        Kevlar, Engine Torque Capacity = 510 lb.ft., 445HP
04-160.3C        Ceramic, Engine Torque Capacity = 560 lb.ft., 490HP (current selection)

Used with a conventional solid flywheel

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Woven Organic 11-3/4" x 10T x 1-1/8" Dampened Push
Kit Includes:  Pressure Plate, Clutch Disc, Release Bearing, Pilot Bushing, Alignment Tool
Engine Torque = 560 lb-ft., 490HP

Refer to the technical bulletin TB040 regarding Concentric Salve Cylinder Release Bearing installation procedures.

Technical Bulletins are shown to provide you with additional information that may affect the installation of this clutch part in your vehicle. The bulletin does not indicate that the part you are looking to purchase is compromised in any way. These bulletins are often generated by the original vehicle manufacturer or the original clutch manufacturer and are intended to make the installer aware of issues that may affect the performance of the clutch system.

There are no comments for this product.

Fits: