07-153.3C Stage 3 Ceramic Clutch Kit: Ford 7.3L Powerstroke Diesel F250 F350 F450 F550 Super Duty Pickup - 13 in.

This is a Phoenix Friction Stage 3 Street Performance Clutch Kit. The kit features a Phoenix Friction high heat Ceramic spring dampened disc. It will provide up to a 60% increase over the stock engine torque capacity. At the same time, you will not notice any increase in pedal effort over the stock clutch and offers chatter-resistant lift-off for a great daily ride. Ceramic button discs will give you the fastest shifts due to their low radial mass which reduces their overall flywheel effect and works with all flywheels, including lightweight steel and aluminum. You can expect 200% the life over original equipment woven organic linings from Ceramic buttons under normal driving conditions. These buttons will absorb the most energy of all the friction materials and is the material of choice for the highest torque applications.

A Phoenix Stage 3 Street Performance product is a direct factory fit to a LuK style flywheel and requires no modifications for installation. If you have not already changed the flywheel to the Luk made flywheel, you need to order it now.  Our part number is FW140 (see also 07-153iF).

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

For towing applications
07-153         Organic, Engine Torque Capaity = 505 lb.ft., 280 HP
07-153.2      Organic, Engine Torque Capacity = 605 lb.ft., 335HP
07-153.3      Organic, Engine Torque Capacity = 685 lb.ft., 380HP
07-153.4      Organic, Engine Torque Capacity = 785 lb.ft., 435HP

For performance applications
07-153.3C    Ceramic, Engine Torque Capacity = 705 lb.ft., 390HP (current selection)
07-153.4C    Ceramic, Engine Torque Capacity = 845 lb.ft., 470HP
07-153.5C    Ceramic, Engine Torque Capacity = 955 lb.ft., 530HP
07-153.6C    Ceramic, Engine Torque Capacity = 1100lb.ft.. 610HP

The following versions of the above kits contain a new flywheel as well

For towing applications
07-153iF       Organic, Engine Torque Capacity = 505 lb.ft., 280HP (includes flywheel)

This is the Luk type aftermarket replacement clutch that requires a different flywheel from OE.  See FW140.

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Ceramic 13" x 10T x 1-3/8" Dampened Push
Kit Includes:  Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing, Alignment Tool
Engine Torque = 705 lb-ft., 390HP

Bolt Tightening Specs:

Pressure Plate Mounting Bolts: 21 lb.ft.
Flywheel to Crank Mounting Bolts: 89 lb.ft.

Refer to the technical bulletin TB039 if the vehicle is experiencing poor or no release and the hydraulics are fine. This technical bulletin discusses an upgrade to the clutch fork and fork anchor.

Technical Bulletins are shown to provide you with additional information that may affect the installation of this clutch part in your vehicle. The bulletin does not indicate that the part you are looking to purchase is compromised in any way. These bulletins are often generated by the original vehicle manufacturer or the original clutch manufacturer and are intended to make the installer aware of issues that may affect the performance of the clutch system.

There are no comments for this product.

Fits: