07-503iFA.2K Stage 2 Kevlar Clutch Kit includes Solid Flywheel: Ford 6.4L Powerstroke Diesel F250 F350 F450 F550 Super Duty - 13 in.

This is a Phoenix Friction Stage 2 Kevlar Street Performance Clutch and Flywheel Kit.

The kit features a heavy duty conventional pressure plate and a Phoenix Friction high heat Kevlar spring dampened disc. This Kevlar clutch guarantees a chatter free engagement, and is without a doubt the smoothest engaging clutch on the market today. It will provide up to a 20% increase in engine torque capacity over the OE clutch. At the same time, you may notice a small increase in pedal effort over the stock clutch. 

A Phoenix Stage 2 Kevlar product is a direct factory fit and requires no modifications for installation. Since there are no metal or abrasive particles in the friction material, Kevlar significantly reduces flywheel wear, and provides 300% longer life than that of original equipment under normal driving conditions. 

NOTE: The original spacer plate Ford 3C3Z-6A366-AA is no longer required. The solid flywheel is designed to account for that thickness and has the centering lip as an integral part of the piece.

Note that Kevlar is a high tech material that needs up to a 1000 mile break in period to properly seat for optimum performance.

Features:

1. We use only quality clutch components that are engineered to function as a matched set and work the way they should with the rest of the driveline components
2. Our kits contain all new components
3. They have been designed to be a direct replacement for the original equipment components used when the vehicle is new
4. All the components we use are manufactured and tested to the Original Equipment specifications of the major automobile manufacturers
5. We warrant that all products are free from defects in workmanship and materials
6. Expert toll-free technical assistance is available

Other available clutch kits for this vehicle:

07-503          Organic, Engine Torque Capacity = 660 lb.ft., 365HP (Same as OE)
07-503.2K     Kevlar, Engine Torque Capacity = 835 lb.ft., 475HP
07-503.3C     Ceramic, Engine Torque Capacity = 925 lb.ft., 530HP
07-503.3KC   Kevlar/Ceramic, Engine Torque Capacity = 920 lb.ft., 525HP

---

The following versions of the above kits contain a new flywheel for the 6.0L DIESEL as well

07-503iF          Organic, Engine Torque Capacity = 660 lb.ft., 365HP (Same as OE) (includes Solid Flywheel)
07-503iF.2K     Kevlar, Engine Torque Capacity = 835 lb.ft., 475HP (includes Solid Flywheel)
07-503iF.3C     Ceramic, Engine Torque Capacity = 925 lb.ft., 530HP (includes Solid Flywheel)
07-503iF.3KC   Kevlar/Ceramic, Engine Torque Capacity = 920 lb.ft., 525HP (includes Solid Flywheel)

---

The following versions of the above kits contain a new flywheel for the 6.4L DIESEL as well

07-503iFA         Organic, Engine Torque Capacity = 575 lb.ft., 365HP (Same as OE) (includes Solid Flywheel)
07-503iFA.2K    Kevlar, Engine Torque Capacity = 835 lb.ft., 475HP (includes Solid Flywheel) (current selection)
07-503iFA.3C    Ceramic, Engine Torque Capacity = 775 lb.ft., 500HP (includes Solid Flywheel)
07-503iFA.3KC  Kevlar/Ceramic, Engine Torque Capacity = 920 lb.ft., 525HP (includes Solid Flywheel)

Clutch Specifications:

Friction Material: Disc Size: Disc Type: Release Type:	Kevlar 13" x 10T x 1-3/8" Dampened Push
Kit Includes:  Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing, Alignment Tool
Engine Torque = 835 lb-ft., 475HP

Bolt Tightening Specs:

Pressure Plate Mounting Bolts: 28 lbs.ft.
Flywheel to Crank Mounting Bolts: 53 lbs.ft.

2005-2008 F250-550 Super Duty manual trans - clutch pedal concern

Some 2005-2008 F250-550 super duty vehicles with a manual transmission may exhibit a clutch pedal concern described as "falls to the floor", "clutch pedal stays on the floor", or "clutch pedal feels spongy". If the concern is diagnosed as the control assembly - clutch hydraulic actuator (base part number 7c522), ensure the heat shield is fully covering the clutch slave cylinder end of the assembly. If the heat shielding is not fully covering the clutch slave cylinder, slide the heat shielding toward the transmission until the forward end of the shield contacts the cylinder mounting flange at the transmission housing.

Source
Item 0966

There are no comments for this product.

Fits: